Precision at its Finest: Elevate Your Lab Experiments with Global Lab Supplies
Condenser Friedrich
- Specially designed inner spiral tubes ensure a long vapour path.
- Offer better heat transfer.
- Condenser has a standard taper outer joint and a lower inner drip tip joint.
| Connector | Glass, Screw Thread |
|---|---|
| Effective Length, mm | 160, 200, 250 |
| Socket Size | 19/26 |
| Cone Size | 19/26, 24/29 |
| Pack Size | 1 |
Related Products
SKU: 16.132
Condenser Inland Revenue
- Inland Revenue Pattern
- Highly Efficient
- Vapour and distillate move down through the coil
- Coolant water flows outside the coil
Out of stock
SKU: 16.144
Condenser Ether
Highly efficient coil condenser suitable for condensing very volatile liquids. Inner coil with large surface area. Outer water jacket to avoid vapour creep around the coil. Coil and jacket are highly independent and can be fed from separate water supplies for maximum efficiency.
Out of stock
SKU: 16.124
Condenser Double Surface Davies
These condensers are majorly used in research laboratories. A double-surface condenser has a water jacket both on the outside and through the center of the condensing tube. It is required where the condenser liquid is very volatile. Hence for distilling ethers, alcohols, esters, aromatics, petroleum products and essential oils, these condensers are widely used.
Out of stock
SKU: 16.108
Condenser Coil Graham (Coil Distillate Type)
- The coiled Condensation tubes provide greater surface area for cooling.
- Designed with standard joints providing universal fitting.
- Available with glass & Plastic hose connector.
- Detachable plastic screw thread connectors provide easy and safe attachment of flexible tubing.
Out of stock
SKU: 16.112
Condenser Coil Graham (Jacket Distillate Type)
- The coiled Condensation tubes provide greater surface area for cooling.
- Designed with standard joints providing universal fitting.
- Available with glass & Plastic hose connector.
- Detachable plastic screw thread connectors provide easy and safe attachment of flexible tubing.
Out of stock
SKU: 16.148
Condenser Immersion (Cold finger)
- For immersion into distillation assemblies etc.
- Can be used to regulate refluxing by adjusting the flow of air or water through it.
Out of stock
SKU: 16.136
Condenser Allihn (Bulb Condenser)
- Conformity to DIN 12581.
- Better surface area than the Liebig condenser, Series of bulbs provide higher-cooling capacity which is ideal for reflux applications
- Designed with standard joints providing universal fitting.
- Available with Glass & Plastic hose connector.
- Detachable plastic screw thread connectors provide easy and safe attachment of flexible tubing.
Out of stock
SKU: 16.12
Condenser Double Coil with Common Inlet
Features a double coil design with a common water inlet suitable for pilot plant work.
Out of stock
SKU: 16.104
Condenser Liebig
- Conformity to DIN 12576.
- Elementary Design.
- Lighter wall of the inner tube facilitates effective heat transfer.
- Designed with standard joints providing universal fitting.
- Available with Glass & Plastic hose connector.
- Detachable plastic screw thread connectors provide easy and safe attachment of flexible tubing.
* represents Non DIN sizes
Out of stock
SKU: 16.116
Condenser Coil Reversible
- Designed with standard joints providing universal fitting.
- Available with Glass & Plastic hose connector.
- Detachable plastic screw thread connectors provide easy and safe attachment of flexible tubing.
Out of stock
SKU: 16.128
Condenser Jacketed Coil Double Surface Condenser
Double Surface condensers with a coil as the inner surface provides approximately twice the surface area of plain coil condensers of the same effective length.
Out of stock