Precision at its Finest: Elevate Your Lab Experiments with Global Lab Supplies
Zirconium Crucibles [straight wall]
Zirconium is our most effective crucible material for fusions using sodium carbonate or sodium peroxide. It is an excellent low-cost replacement for platinum. And, based on an average of 100 fusions per crucible, it is more cost effective than less expensive porcelain or steel crucibles.
Other advantages of zirconium are its complete resistance to the action of most solvents of all concentrations such as nitric, hydrochloric, sulfuric and perchloric acids.
This allows the fusions to be dissolved out of the crucible completely with little or no contamination of the sample. Alkaline solvents such as ammonium hydroxide, acetate sulfide, carbonate and (Na, K) hydroxide, sulfide, carbonate and cyanide are also without effect.
Zirconium is our most effective crucible material for fusions using sodium carbonate or sodium peroxide. It is an excellent low-cost replacement for platinum. And, based on an average of 100 fusions per crucible, it is more cost effective than less expensive porcelain or steel crucibles.
Other advantages of zirconium are its complete resistance to the action of most solvents of all concentrations such as nitric, hydrochloric, sulfuric and perchloric acids.
This allows the fusions to be dissolved out of the crucible completely with little or no contamination of the sample. Alkaline solvents such as ammonium hydroxide, acetate sulfide, carbonate and (Na, K) hydroxide, sulfide, carbonate and cyanide are also without effect.
Related Products
Double Roller Crusher
● Rollers surfaces are with special treatment and do not stick to coal.
● Adjusting wheel with scale provides accurate rollers gap adjustment.
● Uniform output and high efficiency.
● Fully sealed cabinet design offers safe and dust free operation.
● Low noise and easy maintenance.
Crucible Tumbler
GLS’s crucible tumbler is a new type of forward and reverse rotating mixing equipment. The crucible tumbler is mainly used for batch mixing of fire assay mineral samples and fluxes. The device can mix up to 50 fire assay crucibles at a time. This significantly improves the efficiency of laboratory sample preparation and reduces manual operations. It is one of the necessary equipment for fire assay laboratory.
The lengthy time required for fire assaying of gold, silver and precious metals can often be compensated for by the simultaneous analysis of a large number of samples. A typical fire assay laboratory is usually equipped with several furnaces and cupellation furnaces, each capable of collecting multiple samples. Therefore, GLS’s Multiple Sample Load Forklift, Crucible Tumbler and other equipment have greatly improved the efficiency of laboratory sample preparation and load-and-unload.
Safety Goggles
Safety goggles can provide special eye protection for specific work and environments. Safety goggles are your ideal choice when you need to minimize the risk of liquid splash, corrosive vapor, air dust and solid particles’ high-speed impact. Safety goggles are mainly divided into three types: anti-solid debris, anti-chemical solution and anti-radiation.
Blade Hammer Crusher
● Suit to both stalk type fiber material and mineral type granular material.
● Welded steel crushing cavity can avoid easy crack and material holdup problems.
● Fully sealed cabinet design offers safe and dust free operation.
● Full width hammer heads crush materials in full section and avoid problems of blocking working cavity and sample holdup.
● Crushing large moisture samples without moisture lose and with uniform output and high efficiency.
● Low noise and easy moving with wheels.
Zirconium Crucibles [low form]
Zirconium exhibits superb corrosion resistance in most organic and inorganic acids, salt solutions, strong alkalis and a few molten salts.
The passive oxide film (corrosion barrier) is stable in both reducing and oxidizing conditions. Zirconium is excellent in both acid and base solutions.
The temperature limit for use in air is
about 450˚C to 500˚C.
Cupellation Furnace
• Easy to maintain and operate.
• Door panel for easy access to transformer.
• Fast and accurate temperature control ensures consistent and stable temperature.
• Built to industrial standards and compatible with multipour and multiload system.
• Pneumatic rising door operated by food pedal reduces thermal radiation hurt and risk to operator.
Fusion Furnace
The Fire assay fusion chamber furnace is a kind of equipment used to melt crushed ore samples (containing precious metal) with mixed fluxes (powdered lead oxide) in a refractory clay crucible.
GLS supplies various types of laboratory fusion furnaces for fire assay. The industrial-sized, large-capacity furnace chamber can be loaded with multiple crucibles, which significantly improves the efficiency of laboratory smelting and testing of ore samples and reduces the frequency of manual operations.
Alumina Ceramic
Alumina ceramic crucibles and corundum ceramic crucibles include: arc alumina crucibles, square alumina crucibles, rectangular alumina ceramics crucibles, cylindrical ceramic crucibles, and various special-shaped alumina ceramics crucibles. We undertake all kinds of non-standard and special-shaped alumina corundum ceramic crucibles, please contact us! Corundum ceramic crucible series: suitable for various laboratory metal and non-metal sample analysis, and various industrial analysis.
Bullion Blocks
Magnesia Bullion Block is a shallow, porous block with multiple holes, made from pure Magnesite, in which gold or silver can be refined or assayed by melting with a blast of hot air which oxidizes lead or other base metals.
Bullion Blocks are specifically designed to stand longer in the extreme heat of furnaces. These blocks are great heat conductors and high efficient to use.
These do not not crack or break over the course of time as well as demands no maintenance. Moreover, these Blocks are extremely durable and available in various specifications.
