The GLS High Performance (HP) Shaft Guide with PEEK Taper features a standard taper ground glass joint and can be used with glass or metal shaft stirrers. The composite PTFE/PEEK seal maintains vacuum over a wide temperature range without shedding particles. Available with or without a moulded-in PTFE/PEEK guide ring located at the end of the taper, which provides a guide to assist alignment of the shaft. Manufactured from virgin-grade PTFE conforming to FDA and USP Class VI requirements with exceptional chemical resistance.
Key Features
- HP Shaft Guide with standard taper ground glass joint.
- PEEK taper construction.
- Can be used with glass or metal shaft stirrers.
- Composite PTFE/PEEK seal maintains vacuum over a wide temperature range.
- No particle shedding.
- Available with or without a moulded-in PTFE/PEEK guide ring.
- Guide ring assists alignment of the shaft.
- Virgin-grade PTFE conforming to FDA and USP Class VI requirements.
- Exceptional chemical resistance.
- Suitable for vacuum (5mmHg) and pressure (3-5psi) applications.
- Maximum recommended speeds: 500rpm (continuous), 800rpm (intermittent).
- Self-releasing ring for ease of removal.
- Autoclavable (disassemble parts first).
- Replacement parts available.
- Note: PEEK has reduced chemical resistance compared to PTFE and may be affected by acids, phenols and halogen-based compounds.
Specifications
-
Brand: GLS
-
Product Type: Shaft Guide
-
Design: High Performance (HP), A Length Cone, PEEK Taper
-
Material: Virgin-Grade PTFE
-
Material Compliance: FDA and USP Class VI
-
Seal: Composite PTFE/PEEK
-
Taper: PEEK
-
Chemical Resistance: Exceptional
-
Vacuum: Suitable for 5mmHg
-
Pressure: Suitable for 3-5psi
-
Max Speed: 500rpm continuous, 800rpm intermittent
-
Sterilisation: Autoclavable (disassemble parts first)
Available Sizes
- Shaft 8, Cone 19/38, Ht 70, Ring Ø 42, PEEK Taper
- Shaft 8, Cone 24/40, Ht 60, Ring Ø 42, PEEK Taper
- Shaft 10, Cone 24/40, Ht 60, Ring Ø 42, PEEK Taper
- Shaft 10, Cone 29/42, Ht 60, Ring Ø 50, PEEK Taper
- Shaft 10, Cone 34/45, Ht 60, Ring Ø 50, PEEK Taper
- Shaft 10, Cone 45/50, Ht 60, Ring Ø 58, PEEK Taper
- Shaft 12, Cone 29/42, Ht 70, Ring Ø 50, PEEK Taper
- Shaft 16, Cone 34/45, Ht 70, Ring Ø 50, PEEK Taper
- Shaft 19, Cone 45/50, Ht 70, Ring Ø 58, PEEK Taper